Description
Advantages:
• Does not stain or streak aluminum.
• Suitable for interior and exterior surfaces and parts.
• Soluble in water in all proportions.
• Pleasant scent.
• Safe for metals and well bonded paints.
• Funficide
• Mildewstat (on hard, non- porous surfaces)
• Virucide
• Does not attack plastic and Plexiglas when used according to the instructions.
Uses:
a) Interior cleaner: Is used for removing all customary soils as stains, oils, nicotine, crayon etc. from inner surfaces and seats of aircrafts.
b) Exterior cleaner: For effectively cleaning painted and unpainted aircraft exterior. Removes dirt, grease, petroleum and synthetic oil films, light carbon, etc.
c) Disinfectant and cleaner: special designed liquid product with powerful disinfecting and deodorizing capacities.
Method of use:
a) Interior application: Use diluted in water in a proportion ranging of 1 part of BELCAN AVIO PLUS with 10-15 parts of water. Spray on or apply with a mop or clean cloth wet with the product. After a suitable wetting period, depending on degree and type of contamination, wipe off with a clean-dry cloth. Stubborn spots may require application of a more concentrated solution. Rinsing is not required but is desirable for most effective removal of loosened dirt film.
b) Exterior application: Use diluted in water in a proportion ranging from 1 part up to 15 parts of water.
For heavy duty cleaning: Neat or diluted in a proportion of 1:5.
For light duty cleaning: Diluted with water in a proportion of 1:5 to 1:15.
Allow to stand for 5-10 minutes. Brush all areas with soft bristle brush and finally rinse with high pressure water.
c) Disinfectant and cleaner :
Special uses:
1) Oxygen masks: use 1 part of BELCAN AVIO PLUS diluted with 30 parts of water (warm or cold) / final rinsing is not necessary
2) Aircraft Galley : use 1 part of BELCAN AVIO PLUS diluted with 30 to 60 parts of water (warm or cold)
3) Toilet tanks : use 1 part of BELCAN AVIO PLUS diluted with 30 parts of water. After drain off, fill the toilet tank with the product and let soak for 24h, then drain again.
Safety:
Avoid contact with skin and eyes. For further information refer to analytical Material Safety Data Sheet.
